Template

Motorized Equipment Safety Inspection Checklist

20+

Use this EAS Essential motorized equipment checklist to record daily inspections and enforce safe operation. Verify no leaks, functioning lights and alarms, tire condition and pressure, proper rigging and load limits, safe driving and lifting techniques, three point contact, seatbelt use, manuals and decals, and operator training credentials.

With Mitti you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With Mitti you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the Mitti (by SafetyCulture) community. Mitti has re-published this content and where possible, has credited the original author. Mitti has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with Mitti’s Terms and Conditions .

Template

EAS Essential Aerial Lifts Safety Checklist

This EAS Essential Aerial Lifts Safety Checklist supports safe operation and daily inspections of scissor and boom lifts. It covers pre-use checks for leaks, welds, guards, tires, lights, and alarms; keeping platforms clear of tools and debris; correct travel with platforms lowered; proper dismount using three points of contact; fall protection with chains latched and gates locked; prohibiting climbing on guardrails or exiting the lift; confirming safety decals and labeled controls; ensuring the operator’s manual is on the vehicle; and verifying operator training and possession of an EAS training card.

by Adam Kelly, from the Community

20+

Get

Template

Indy Equipment Shops Safety Inspection

This checklist supports safety inspections for equipment shops. It covers ladders and access, motorized equipment operation and alarms, electrical grounding and cord condition, hand and power tool use, manual handling limits and aids, required PPE, fire extinguisher status, housekeeping, and medical emergency readiness including first aid, eyewash, and posted plans. It also includes SDS and hazard communication checks and space for site details. Use it to standardize audits, address hazards, and strengthen compliance.

by Caitlin Dickinson, from the Community

10+

Get

Template

RMX Jobsite and Employee Audit

This RMX Jobsite and Employee Audit checklist helps supervisors and safety managers assess compliance across construction operations. It covers vehicle and DOT safety, equipment and tool condition, housekeeping, permits, railings and guarding, traffic control, safe access, and correct tool use. Driving safety items include brake checks, seatbelt use, lane changes, following distance, speed, distraction, and backing techniques. Employee safety checks verify three points of contact, safe equipment operation, adherence to procedures, body positioning, PPE condition and use, lifting techniques, lockout tagout, and fall protection. Use this template to document findings, assign actions, and improve safety performance.

by Josh McComas, from the Community

Get

Template

Safety Development Group Safety Audit

Perform a comprehensive construction job site safety audit using this checklist from Safety Development Group. Review administration and training (OSHA 300 logs, orientations), JSA quality and permit alignment, PPE use and condition, housekeeping, fall protection, fire safety and hot work, ladders, scaffolds and access, welding and cutting controls, crane lifting and rigging requirements, excavation and confined space controls, motorized equipment operation, electrical safety and lockout/tagout, and environmental protections including SDS and waste handling.

by charles dickinson, from the Community

Get

Template

Forklift Daily Check Sheet

This forklift daily check sheet helps operators complete a quick, consistent pre-start inspection before use. It guides checks for leaks, seat and seatbelt condition, registration and inspection dates, hour meter, gauges and warning lights, engine oil, belts, wheel nuts, tire condition and pressure, and all lights. It also covers horn and brake function, hydraulic controls, lifting chains, mast and rollers, carriage and forks, and notes for any new damage. Use it to standardize equipment safety and keep forklifts compliant and ready for work.

by Byron Johnson, from the Community

Get

Template

NCG Safety Inspection Report

Use the NCG Safety Inspection Report to assess construction site conditions and document compliance. The checklist covers office site safety, housekeeping, PPE, fall protection, ladders and stairs, scaffolding, welding and cutting, lifting and rigging, excavation and confined space, motorized equipment, and electrical safety. It also includes emergency response, toolbox meetings, JHAs, SDS management, and signage. Identify hazards, verify training and permits, and keep records to improve safety performance.

by Randy Cofer, from the Community

Get

Motorized Equipment Safety Inspection Checklist

About author

You might also like

EAS Essential Aerial Lifts Safety Checklist

Indy Equipment Shops Safety Inspection

RMX Jobsite and Employee Audit

Safety Development Group Safety Audit

Forklift Daily Check Sheet

NCG Safety Inspection Report

You might also like

EAS Essential Aerial Lifts Safety Checklist

Indy Equipment Shops Safety Inspection

RMX Jobsite and Employee Audit

Safety Development Group Safety Audit

Forklift Daily Check Sheet

NCG Safety Inspection Report