Template

Working at Heights SWMS Template

500+

Falls are reported as the leading cause of construction worker deaths. Use this SWMS template to outline the needed tasks (e.g. working on a roof, operating a ladder or working on a scaffold) to complete the job and the safest way to perform it. Risks such as falls, slips, trips and collision should be clearly identified for each of the tasks. Consult the people who usually perform the job and get insights about factors to decide if it’s safe to continue the work or not.

With Mitti you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With Mitti you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Mitti

Mitti (by SafetyCulture) is the operations system for every site, shift and standard. Trusted by 80,000 organizations in 190 countries, Mitti publishes free checklists, SOP templates, audit checklists and toolbox talk topics that turn paper processes into a digital audit trail. Download one, put it to work on your next inspection or shift, and see why teams keep coming back for more.

Template

Confined Space Pre-Entry Inspection

Use this checklist before entering a confined space. Start by filling out general information about the confined space, its type, how often it is used, and the work to be performed inside. List down names of the people involved in the work and classify if it is permit-required or not. Next check if the area is free from hazards and ensure that the atmosphere is tested carefully. Evaluate if the workers are competent and trained to perform the job and if proper protective equipment (safety harness and lifelines) are worn properly. Lastly, ensure that permits are posted in the entrance of the confined space and show the names of the persons qualified to perform the job. Complete the audit by citing any safety recommendations.

by Mitti

500+

Get

Template

Construction Safe Work Method Statement (SWMS) Template

This Construction Safe Work Method Statement (SWMS) template provides a structured way to plan and document high-risk construction activities. It helps teams identify hazards such as working at heights, excavation, asbestos, electrical work, mobile plant, and demolition, then define practical control measures, responsibilities, and sign-offs. Use it to outline tasks, assess risk before and after controls, consult relevant standards and codes of practice, and ensure inductions, permits, PPE, and emergency plans are in place to keep crews safe and compliant.

by Luke Johnsont, from the Community

10+

Get

Template

Comprehensive Job Hazard Analysis Form

Use this template to conduct more detailed hazard analysis in your workplace. Explore the features of SafetyCulture and modify the checklist based on your workplace needs. Start by listing the names of the people who develops JSA procedures, and select the work permits, authorizations and PPE required for the activity. Next enumerate applicable trainings to carry out individual tasks. Also, take note of the equipment checks conducted. Proceed with the job safety analysis and risk assessment by adding steps, selecting hazards and identifying controls. Conduct an initial risk assessment, add controls (if needed), then rate the residual/revised risk analysis. Confirm whether the process is completed or not. If not, conduct a task review to serve as a basis for the continuity of the process. Finally, acknowledge by getting all people involved to sign off.

by Mitti

1,000+

Get

Template

General Hazard Identification Form

This general hazard identification form aims to assess potential risks (e.g noise, manual handling, excavation, etc.) observed within the work premises. Describe the nature of work and select the protective equipment available and needed to protect the employees from harm. Proceed with identifying the hazards present. Capture photo evidences of the situation or object that may cause serious problems to workers. You can assign an action to a supervisor for review and immediate resolution. Add other hazards which are not listed on the template. Complete the audit by stating some observations and rate the overall assessment if the work site is safe or not. Use SafetyCulture's Analytics feature to track improvements on safety. Analyze these data to construct better safety plans and strategies for your organization.

by Mitti

3,000+

Get

Template

Working at Heights Inspection Checklist

Use this working at heights inspection checklist to keep workers safe when operating above ground level. Record the nature of work and activities such as scaffolding, roof work, pipework, or painting. Identify hazards like falls, fragile roofs, falling objects, and slips. Verify controls for planning, hazard surveys, supervision, fragile roof access, ladders and platforms, open edge protection, racking access, worker training, contractor management, and fall‑arrest equipment and anchor points. Note positive observations, list recommendations, and complete with the inspector’s name and signature.

by Darren Burns, from the Community

10+

Get

Template

Painters USA JSA V 2.0

This form is used to assess the risks of injury and/or illness associated with a specific job and the tasks involved in completing that job. A JSA must be completed for each job the worker will perform.

by Darren Lottes, from the Community

60+

Get

Working at Heights SWMS Template

About author

You might also like

Confined Space Pre-Entry Inspection

Construction Safe Work Method Statement (SWMS) Template

Comprehensive Job Hazard Analysis Form

General Hazard Identification Form

Working at Heights Inspection Checklist

Painters USA JSA V 2.0

You might also like

Confined Space Pre-Entry Inspection

Construction Safe Work Method Statement (SWMS) Template

Comprehensive Job Hazard Analysis Form

General Hazard Identification Form

Working at Heights Inspection Checklist

Painters USA JSA V 2.0