This means of egress inspection checklist gives safety coordinators a structured way to inspect exit access, exit doors, emergency lighting, fire doors, occupant capacity and evacuation planning. Catch the conditions that produce egress violations before an inspector does. Download this checklist to build an inspection record that supports code compliance and audit readiness.
With Mitti you can
With Mitti you can
About author
Mitti (by SafetyCulture) is the operations system for every site, shift and standard. Trusted by over 80,000 organisations, Mitti brings your people, operational data and workflows into one operating picture. From the frontline to the boardroom, it gives everyone a clear understanding of what's happening, highlights what needs attention and recommends what to do next. Every inspection completed, issue raised and action taken becomes intelligence your teams can use to improve every day.
Frequently Asked Questions
Blocked exits, propped fire doors and failed emergency lighting are among the most cited egress violations. This checklist catches them before an inspector does.
Egress issues often accumulate between inspections: a fire door wedged open, an exit sign that stopped illuminating, an unlabeled door that occupants mistake for an exit. A scheduled checklist surfaces these before they become citations.
Fire doors propped or wedged open are one of the most frequently cited NFPA 101 violations in hospitality and commercial buildings
Exit paths blocked by stored materials or furniture pass a visual sweep but fail a structured inspection that asks whether the required clear width is maintained
Emergency lighting failures accumulate silently between tests because there is no prompt to check illumination on a scheduled basis
Ten inspection areas covering every element of a compliant means of egress
From exit access and door hardware through to security monitoring and maintenance records, this checklist gives you a complete picture of your building's egress condition in one inspection.
Exit doors: unlocked from inside, single-operation hardware, correct swing direction, auto-latching closers and not-an-exit signage on misleading doors
Emergency lighting and exit signage: illuminated, undamaged, tested on schedule and backed up by a functioning power system
Fire doors and stairwells: kept closed, auto-latching, frames and seals intact, stairways clear, handrails fitted and in good condition
A means of egress inspection record that holds up under compliance review
When every inspection uses the same checklist, your compliance record is consistent and retrievable. Deficiencies are documented with corrective actions assigned. Repair records confirm issues were resolved. And the overall compliance status at the end of each inspection gives management a clear picture without needing to read through every individual item.
Download this means of egress inspection checklist and run an inspection that actually catches what a walkthrough misses.