Template

Roof Safety Inspection

400+

Use this template to keep employees safe when executing work on roofs. Begin with describing and capturing photos of the work to be performed and workers on site. Check permits, weather, roof safety equipment, signage and proper PPE before employees start work. Confirm workers have undergone training and are informed about communication protocols. Assess the condition of access, walkways and guard rails. Identify potential openings which could cause slips and fatal falls. Finally conclude the inspection with an overall rating and recommendation if employees should proceed with work or not.

With Mitti you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With Mitti you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

SafetyCulture

Mitti (by SafetyCulture) is the operations system for every site, shift and standard. Trusted by over 80,000 organisations, Mitti brings your people, operational data and workflows into one operating picture. From the frontline to the boardroom, it gives everyone a clear understanding of what's happening, highlights what needs attention and recommends what to do next. Every inspection completed, issue raised and action taken becomes intelligence your teams can use to improve every day.

Template

Roof Safety Pre-Access Checklist Form

Use this roof safety pre-access checklist to ensure safe roof work before access. Verify permits, acceptable weather, worker training, and required PPE. Review access points and structure, transport of tools and materials, roof walkways and obstructions, edge protection, guard rails, anchor points, and harness or lanyard inspections. Complete a quick risk assessment and document findings, then provide a clear recommendation to proceed or halt the task to prevent incidents.

by Thomas Bearder, from the Community

10+

Get

Template

General Hazard Identification Form

This general hazard identification form aims to assess potential risks (e.g noise, manual handling, excavation, etc.) observed within the work premises. Describe the nature of work and select the protective equipment available and needed to protect the employees from harm. Proceed with identifying the hazards present. Capture photo evidences of the situation or object that may cause serious problems to workers. You can assign an action to a supervisor for review and immediate resolution. Add other hazards which are not listed on the template. Complete the audit by stating some observations and rate the overall assessment if the work site is safe or not. Use SafetyCulture's Analytics feature to track improvements on safety. Analyze these data to construct better safety plans and strategies for your organization.

by SafetyCulture

3,000+

Get

Template

Roof Safety Inspection Checklist

This roof safety inspection checklist is designed for pre-access verification before working at height. It guides teams to record site details, list personnel on the roof, and confirm acceptable weather and training. Inspect access points and structural conditions, walkways, and roof areas. Verify PPE including harnesses and lanyards, check anchor installation and attachment, and note skylights or other openings to avoid. Confirm ladder setup, length, brackets, and a spotter. Capture photos, add recommendations, and complete with name and signature.

by Kim Flanagan, from the Community

10+

Get

Template

Machine Guarding Checklist

This template covers the pre-operation and post-operation checks. Pre-operation checks are conducted to evaluate the condition of machine guards and the protection and training of the workers. Begin with a description of the work, the names of employees and the type of guards to be inspected. Check the machine guards and determine if sufficient to prevent body parts from making contact with dangerous moving parts. Evaluate workers if they have sufficient knowledge of the machine, its operation including the guard types. Ensure that all workers are wearing appropriate protection and are following safe handling instructions when using machinery. The post-operation check is for determining if all machine guards are in good condition and that all incidents have been reported to the supervisor. Other observations, comments, and overall assessment are also noted.

by SafetyCulture

900+

Get

Template

Point of Work Audit for Employees and Contractors

Use this point of work audit checklist to evaluate employees and contractors before starting tasks. Verify visitor registration, permit to work status, and the location of the POW risk assessment. Check evidence of lockout tagout with padlock numbers, determine whether live testing is involved, and confirm appropriate controls. If required, confirm permits and precautions for working at height, confined spaces, and hot work. Inspect lifting equipment per LOLER, ensure tags are in date, and verify PPE such as safety glasses, hearing protection, and safety footwear. Confirm documentation is complete, hazards are identified, and controls are effective.

by Paul Hewitt, from the Community

10+

Get

Template

Working at Heights Inspection Checklist

Use this working at heights inspection checklist to keep workers safe when operating above ground level. Record the nature of work and activities such as scaffolding, roof work, pipework, or painting. Identify hazards like falls, fragile roofs, falling objects, and slips. Verify controls for planning, hazard surveys, supervision, fragile roof access, ladders and platforms, open edge protection, racking access, worker training, contractor management, and fall‑arrest equipment and anchor points. Note positive observations, list recommendations, and complete with the inspector’s name and signature.

by Darren Burns, from the Community

10+

Get

Roof Safety Inspection

About author

You might also like

Roof Safety Pre-Access Checklist Form

General Hazard Identification Form

Roof Safety Inspection Checklist

Machine Guarding Checklist

Point of Work Audit for Employees and Contractors

Working at Heights Inspection Checklist

You might also like

Roof Safety Pre-Access Checklist Form

General Hazard Identification Form

Roof Safety Inspection Checklist

Machine Guarding Checklist

Point of Work Audit for Employees and Contractors

Working at Heights Inspection Checklist