Skip to content
Mitti by SafetyCulture
Course

Ladder Safety

0
Downloads: 5,000+
Get this course

This ladder safety course gives risk management and compliance teams a way to train staff on pre-use checks for leaning ladders and stepladders. Cover checks for the stiles, feet, rungs, and locking mechanisms, then apply the 1-in-4 angle rule and three points of contact. Enroll your team to build ladder habits that hold up under real conditions.

With Mitti you can

Create training in minutes, not months
Share courses in one click
Manage completion and track performance
Increase participation and retention

With Mitti you can

Create training in minutes, not months
Share courses in one click
Manage completion and track performance
Increase participation and retention

The full course includes

    About author

    Mitti (by SafetyCulture) is the operations system for every site, shift and standard. Trusted by 80,000 organizations in 190 countries, Mitti publishes free checklists, SOP templates, audit checklists and toolbox talk topics that turn paper processes into a digital audit trail. Download one, put it to work on your next inspection or shift, and see why teams keep coming back for more.

    Frequently Asked Questions

    When ladder pre-use checks get skipped, falls follow

    Ladder falls remain one of the most common causes of injury at height, and most trace back to a setup or check that got skipped.

    • Staff skip the pre-use check because the ladder "looks fine."

    • The ladder gets set up too steep or too shallow, since nobody's measuring the angle.

    • Workers overreach instead of repositioning the ladder, losing three points of contact.

    • Stepladders get used side-on for tasks that need to face the work.

    Train your team on checks and safe technique in one course

    Risk management teams need a consistent way to teach ladder safety that holds up on site, not just in a briefing. This ladder safety course walks staff through pre-use checks and safe technique for both ladder types.

    • Check the stiles, feet, rungs, locking mechanisms, and platform before every use.

    • Apply the 1-in-4 angle rule and three points of contact on leaning ladders.

    • Apply the four-foot level check and top-three-steps rule on stepladders.

    Finish with ladder habits that hold up on site

    When every team member runs the same pre-use check and follows the same setup rules, a ladder incident becomes the exception, not something waiting to happen. New starters pick up safe habits faster with a consistent standard to learn from.

    Enroll your team in this ladder safety course and build habits that hold up on site.