Template

Splicing Team Gate Check

Ensure telecom splicing crews are site-ready and compliant with this gate check. Verify inductions, SMART and NRSWA cards, and availability of the works product manual. Confirm PPE, first aid kit and eyewash, fire extinguisher, blue roll or hand wipes, and a sharps bin. Inspect splicer machine condition, calibrated gas detector, testing equipment, and tent or umbrella. Check SLG setup and BT-spec gate guards. Review vehicle daily checks, Chapter 8 compliance, and plant safety. Document findings with photos and signatures before starting work.

With Mitti you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

With Mitti you can

Digitize any process, procedure or policy

Eliminate mistakes made by paper-based processes

Create and share professional reports instantly

Confirm accountability and compliance with a digital log

About author

Community

This community page makes available free workplace checklists and templates created by other users within the Mitti (by SafetyCulture) community. Mitti has re-published this content and where possible, has credited the original author. Mitti has not verified the accuracy, reliability or suitability of any community content. You agree that your use of any of this content is in accordance with Mitti’s Terms and Conditions .

Template

Install Team Gate Check

This Install Team Gate Check helps field crews confirm site readiness and safety before starting work. Use it to verify PPE availability, crew inductions, NRSWA and smart awards cards, and Chapter 8 traffic control. Capture evidence of calibrated equipment such as GDU, CAT & Genny, and harnesses, and check ladders, SLG, gate guards to BT spec, and insulated tools. Include first aid kits, eye wash, fire extinguisher, blue roll, and hand wipes. Validate weekly vehicle checks, plant compliance, and photo proof as required to ensure a safe, compliant telecom installation start.

by Laura Kent, from the Community

Get

Template

Cable Team Gate Check

Use this Cable Team Gate Check to ensure telecom field crews are ready and compliant before starting work. Confirm PPE, inductions, NRSWA and Smart Awards cards, and availability of manuals. Verify equipment such as gas detectors, first aid kits, fire extinguishers, ladders, harnesses, testing tools, and SLG. Check vehicles and plant, Chapter 8 compliance, tablets, and BT-spec gate guards, with photos and serials where required.

by Laura Kent, from the Community

Get

Template

Vehicle Gate Check Audit Checklist

This vehicle gate check audit template helps fleet managers and drivers complete pre-departure inspections for safety and compliance. It covers PPE checks, safety glasses and hearing protection, vehicle safety pack, fire extinguisher and driver training, first aid and eyewash kits, hydration and hygiene supplies, oil spill kit, license and CPC verification, log book or digital tachograph card and spare roll, O Licence disk visibility, and visual leak checks around tank fittings and valves. Use it to standardize inspections across environmental services and logistics operations.

by Paula Harry, from the Community

20+

Get

Template

Fibre Works Start Checklist

Use this fibre works start checklist to prepare telecom site crews before beginning subduct and cable installation, splicing, testing, and surveys. Verify safety briefings, PPE, permits, first aid and fire equipment, welfare facilities, traffic management, and CAT and Genny checks. Record site-specific risks, who might be harmed, required controls, and review steps. Confirm materials and tools readiness, plant condition, spill kits and labelling, and compliance with NRSWA, CSCS, CPCS and NPORS. Use this template as a pre-start gate to ensure the site is safe to start work.

by Steve Yates, from the Community

10+

Get

Template

Splicing and Cabling Risk Assessment Checklist

This telecom splicing and cabling risk assessment checklist helps field teams identify and control hazards before and during work. It covers site conditions, exposed wiring, access routes, lighting, and PPE readiness. Technicians verify ladder condition, recent inspections, two point pole tie off, non slip feet, and pre climb testing, or confirm MEWP readiness with valid LOLER certification and operator training. The checklist includes COSHH controls such as labeling, fiber waste and sharps disposal, and the use of a gas detection unit prior to confined space entry. Use it to document findings, assign actions, and maintain compliance with safety requirements on cabling and splicing jobs.

by Mehran Khan, from the Community

30+

Get

Template

Vehicle Condition Inspection Checklist

This vehicle condition inspection checklist helps teams assess roadworthiness and compliance in the field. Review cleanliness and bodywork, check for Chapter 8 markings, and confirm road tax and MOT dates. Verify that the dashboard and glazing are free of obstructions or damage. Confirm first aid kit, spill kit, eye wash and fire extinguisher availability and expiry dates. Document PPE in use and ensure plant, tools and equipment are stored securely. Record PAT testing and calibration dates for electrical and measuring equipment. Capture defects with photos and note quantities of key tools to maintain safe, compliant operations.

by Gary McGuire, from the Community

10+

Get

Splicing Team Gate Check

About author

You might also like

Install Team Gate Check

Cable Team Gate Check

Vehicle Gate Check Audit Checklist

Fibre Works Start Checklist

Splicing and Cabling Risk Assessment Checklist

Vehicle Condition Inspection Checklist

You might also like

Install Team Gate Check

Cable Team Gate Check

Vehicle Gate Check Audit Checklist

Fibre Works Start Checklist

Splicing and Cabling Risk Assessment Checklist

Vehicle Condition Inspection Checklist