Categories
Construction
Browse construction management templates and training courses covering job site safety, industry standards, and regulatory checks. Support incident reporting, electrical safety, vehicle inspections, and daily site audits so your teams can reduce risk and stay compliant on every project.
Browse Construction
12,861 results- Template
Job Hazard Analysis (JHA) Template
This Job Hazard Analysis (JHA) template helps teams break down job steps, identify worst-case scenarios and likely hazards, and plan behavioral controls to prevent incidents. It covers ergonomic risks (lifting, vibration, awkward postures), equipment and site risks (cranes, forklifts, aerial lifts, rail work, vehicle traffic, fall protection), energy controls (lockout/tagout), tools (saws, grinders, jackhammers), environmental and material hazards (silica, lead, HAZWOPER), required PPE, public safety, and necessary permits (traffic control, excavation, confined space, hot work, scaffolding). Ideal for construction and field operations.
by Courtney Beesley, from the CommunityDownloads: 200+Get - Template
Encore Safety Audit Checklist
The Encore Safety Audit checklist is designed for construction job sites to assess compliance and protect workers. It covers general safety practices, fire safety, housekeeping, hand and power tool use, ladder safety, material handling and forklift certification, and personal protective equipment. Additional sections include respiratory protection, powder actuated tools, and scaffolding with competent person inspections. It also addresses the Focus Four hazards, including caught in, struck by, electrical, and fall risks, plus disposition and routing actions and signature capture for accountability.
by Jack Cain, from the CommunityDownloads: 200+Get - Template
Risk and Compliance Management System Audit
ISO 31000 and ISO 19600 Risk and Compliance Management Systems Audit
by Paul Gear, from the CommunityDownloads: 200+Get - Template
Telehandler Forklift Pre-use Inspection Checklist
This free pre-use inspection checklist helps operators conduct safe, compliant checks on telehandler forklifts. It covers exterior walk-arounds, leaks, tires, nameplates, boom, outriggers, cab and ROPS, engine fluids and belts, battery, power-on checks, instruments, horn and lights, load charts, fire extinguisher, functionality including drive, steering, brakes and backup alarm, lifting attachments, and workplace hazards such as drop-offs, debris, overhead obstructions, and nearby power lines. Bilingual English and Spanish fields are included.
by Warbonnet Construction, from the CommunityDownloads: 200+Get - Template
Nautical Roofing INDUCTION TOOLBOX RECORD
This toolbox is for all workers to complete at the time of site induction.
by Jeremy Broad, from the CommunityDownloads: 200+Get - Template
DRS Tool Order Form V1.0
This DRS Tool Order Form V1.0 helps field technicians and managers request and approve tools and equipment. Capture technician and vehicle details, select ship-to and order locations, and choose single or multiple items from an extensive tool list. Record causes for worn, lost, or broken items and attach photos as needed. The form calculates item costs, tax, and total charges, and documents payroll deduction schedules with required approvals. Includes final authorization and purchasing sections to route orders to corporate for processing.
by Aaron Johnson, from the CommunityDownloads: 200+Get - Template
Intervention En Espace Confiné
Formulaire Pour Identifier Et Analyser Les Risques Des Espaces Confinés
by Yann Lauden, from the CommunityDownloads: 200+Get - Template
Electrical Installation Quality Inspection
This document outlines a comprehensive electrical safety audit framework designed for professional electrical installations and inspections. It covers critical areas including safe isolation procedures, operative competence verification, test equipment requirements, and detailed inspection schedules. The audit encompasses supply and distribution systems, circuit testing, consumer units, and special installations. It features both dead and live testing protocols, with specific attention to earth fault loop impedance, RCD testing, and functional verification. The document includes a structured reporting system for non-conformances, categorizing issues as Major, Minor, or Observational, with clear timelines for remedial actions. It emphasizes safety compliance with BS7671 standards and includes declaration requirements for auditors and recipients.
by Darren Boswell, from the CommunityDownloads: 200+Get - Template
CSUSA Service Tech Safety Inspection form
This checklist is used for safety audits involving the service department.
by Jay Collins, from the CommunityDownloads: 200+Get - Template
Sling and Chain Inspection
Tap the paper clip to attach images and notes of damaged/not safe findings.
by Jordan Tomasone, from the CommunityDownloads: 200+Get - Template
Concrete Pre-Pour Inspection Checklist
This concrete pre-pour inspection checklist helps teams confirm readiness before placing concrete. Review current drawings and approved mix design, then verify reinforcement is clean, correctly positioned, tied, covered, and lapped to specification. Check formwork and falsework for line and level, joint details and waterstops, built-in items and penetrations, and ensure the correct form release agent is on hand. Confirm temporary works approvals and permits, site cleanliness, and pour safety. Capture inspection times, foreman and engineer sign-off, and clearance for concreting to reduce rework and ensure a compliant finish.
by A Kris, from the CommunityDownloads: 200+Get - Template
Dome Construction Safety Inspection / Weekly Tailgate Meeting
Superintendent Weekly Safety Package
by Eric Kokal, from the CommunityDownloads: 200+Get - Template
Quality Assurance Room Inspection Checklist
Comprehensive quality assurance checklist for room inspections, covering cabinet installation, doors, benchtops, appliances, and hardware. Includes maintenance tracking.
by Sam Borg, from the CommunityDownloads: 200+Get - Template
ICAM Investigation and Review Report
This ICAM Investigation Report Checklist is used to assist in the investigation of incidents, accidents and near misses in the field and has been used extensively numerous sectors ICAM is the Incident Cause Analysis Method, an industrial safety initiative that provides the ability to identify what really went wrong and to make recommendations on necessary remedial actions to reduce risk and build error-tolerant defences against future incidents. Use this template as an example to build out a holistic safety solution appropriate for your organisation.
by Scotty Watson, from the CommunityDownloads: 200+Get - Template
SNRC Individual Worker Assessment
This individual worker assessment checklist helps field and site teams verify personal protective equipment and readiness before work. Items include hard hat and visor, safety glasses, hearing protection, high visibility vest, boots, gloves, radio, first aid certification and kit, PFD vest, rain gear, and survival essentials such as whistle, blanket, compass, flashlight, water, and food. Optional items like bear spray and bug protection are noted for remote environments. Record deficiencies, assign corrective actions with due dates, and capture auditor details and signatures to complete the review.
by Aaron Frost, from the CommunityDownloads: 200+Get - Template
Subcontractor Site Inspection
ALUMINIUM DIVISION - SUBCONTRACTOR SITE INSPECTION/AUDIT RECORD
by Russell Lawson, from the CommunityDownloads: 200+Get
Construction safety and quality resources for teams on- and off-site
Discover construction training courses and checklists in SafetyCulture’s Content Library, a centralized online resource where you can browse ready-made instructional and inspection materials. These digital resources give you quicker access to the information you need, right when you need it.
Digital resources that keep work moving
Using digital construction templates and checklists helps teams stay aligned on- and off-site. Moving safety and quality work online cuts down paperwork, reduces compliance gaps, and ensures everyone is working from the same up-to-date information. From incident reporting to equipment checks, updates are shared in real time so issues are flagged early and actions don’t get missed.
Explore a few ways these resources can improve your operations:
Log incidents with an incident report template and respond faster to safety issues.
Run safer worksites with construction safety checklists that help you spot hazards before they escalate.
Stay on top of equipment care with maintenance logs that prevent downtime and extend asset life.
Everything in this library is ready to use and fully digital, so you can adapt it to your workflow and share it across your team. And when you use these resources within the SafetyCulture platform, you unlock even more value—streamlined inspections, real-time insights, and a stronger safety and quality culture on every site.