Fire Safety in Construction: Risks and How to Avoid Them
Enhance the safety of your construction projects, gain essential knowledge, and meet safety standards effectively.
Safety
Top 10 workplace safety statistics
Enhance the safety of your construction projects, gain essential knowledge, and meet safety standards effectively.
Fire safety in construction refers to the measures and protocols implemented to prevent, mitigate, and respond to fire hazards on construction sites. It involves creating and enforcing site-specific fire safety plans, which include conducting regular fire risk assessments, training personnel on emergency procedures, and ensuring the availability of firefighting equipment. These measures are crucial for minimizing the risk of fire outbreaks, mitigating potential damage, and safeguarding lives and property during and after the construction phase.
Construction sites have all the ingredients needed to start a fire: oxygen, heat, fuel, and a chemical reaction. In fact, according to the National Fire Protection Association (NFPA), an average of 4,300 fires have occurred on construction sites each year from 2016 to 2020, often during construction, renovation, or demolition phases.
Given these risks and the frequency of such incidents, it’s essential to recognize the most common fire hazards present on construction sites. Below are some of the most common fire safety risks on construction sites:
Welding, grinding, and sawing can generate sparks that easily ignite nearby flammable materials. To prevent fire, assign a trained fire watch during these operations and keep it active even during the cooling-off period. Fire extinguishing equipment should always be within reach when performing hot work.
Portable heaters used on-site must meet Underwriters Laboratories (UL) safety standards. These devices should be placed at least three feet away from flammable materials and never left unattended. Store propane-fueled heaters in a well-ventilated area, and regularly inspect electric heaters for damaged cords or connections.
Unmonitored access can lead to intentional fire-setting or unsafe behavior that endangers everyone on-site. Protect the area using barriers, surveillance, and clear security protocols to prevent break-ins or vandalism. A layered security approach helps deter criminal activity.
Discarded cigarette butts or ash can ignite flammable debris in seconds. Prohibit smoking across all work zones and enforce this rule through signage and regular reminders. Establish designated smoking zones far from any potential fire hazards.
If mismanaged, gasoline, solvents, and other combustibles can rapidly fuel a fire. Store these substances in approved containers and designated storage areas. Monitor their usage and limit access to trained personnel only.
Cooking appliances such as hot plates and toasters are unsuitable for construction sites. Workers should avoid using such equipment during breaks to prevent accidental fires. Instead, encourage non-heated meals and provide a separate eating area if needed.
Temporary electrical setups are a leading source of fire in construction projects. Licensed electricians must install all wiring and lighting in compliance with National Electrical Code (NEC) standards and check them regularly. They should make immediate repairs if they spot any damage or wear.
Cordless tools and battery packs can overheat when charging or in use, becoming a fire risk. Charge batteries in a controlled area away from active construction work. Inspect equipment regularly to ensure it’s functioning safely.
Without alarms, sprinklers, or extinguishers, fire can spread quickly and undetected. Provide fire extinguishers at accessible locations and ensure all workers know how to use them. Educate the team on identifying early signs of fire and reporting them immediately to minimize danger.
Construction sites face significant fire risks, which is why companies must adhere to various regulations and standards to ensure fire safety on site. While each country has its own set of rules, some common regulations include:
Occupational Safety and Health Administration (OSHA): OSHA has regulations in place to protect workers from fire hazards in construction sites, including requirements for training and prevention measures.
Construction (29 CFR 1926): This standard covers fire protection and prevention in construction sites, including fire extinguishers, housekeeping practices, and safe storage of flammable materials.
National Fire Protection Association (NFPA): The NFPA develops fire safety codes and standards that people and organizations widely used across the US. Some relevant codes include:
NFPA 1 (Fire Code): A detailed standard with fire and life safety rules and guidelines for buildings and other structures.
NFPA 101 (Life Safety Code): Focuses on construction, protection, and occupancy features for new and existing structures to reduce fire risks.
NFPA 70 (National Electrical Code): Provides safety standards for installing electrical systems in buildings.
NFPA 5000 (Building Construction and Safety Code): A comprehensive code covering all building construction aspects, including fire and life safety.
Building Safety Act 2022: This Act establishes clear rules to ensure builders design, construct, maintain, and manage buildings safely. It introduces a new building safety regulator and outlines the responsibilities of owners, managers, designers, contractors, and developers.
Regulatory Reform (Fire Safety) Order 2005 (FSO): The Order establishes fire safety duties for responsible persons in buildings, particularly multi-occupied residential buildings.
Approved Document B (Fire Safety): This document outlines the fire safety standards for designing and constructing new and existing buildings. It covers requirements like fire-resistant materials, sprinkler systems (such as mandatory sprinklers in new care homes), and clear fire escape routes.
National Construction Code (NCC): The NCC governs building regulations in Australia, including fire safety. It outlines mandatory requirements for fire resistance, specifying construction methods and materials for adequate protection.
Australian Standards (AS): Several Australian Standards work alongside the NCC, offering clear technical guidance on fire safety. Some of these include:
AS 1530 (Methods for Fire Tests on Building Materials, Components, and Structures)
AS 2419 (Fire Hydrant Installations)
Local Councils: Along with the NCC and AS, local councils enforce extra fire safety rules tailored to their area. These regulations complement national standards to address local conditions and ensure thorough fire safety.
Each province or territory has a fire code enforced by local authorities. Authorities base these codes on the National Fire Code of Canada, which provides comprehensive guidelines for fire safety in buildings and structures.
[insert infographics here]
Keeping a construction site safe from fire hazards requires proactive planning, proper training, and consistent housekeeping. Implementing preventive measures, securing equipment, and collaborating with local agencies can significantly reduce the risk of fires.
Below are essential industrial fire safety practices every construction site should follow, organized by actionable steps.
Develop and communicate a detailed fire prevention policy that includes emergency contacts, equipment access, and inspection protocols.
Train employees to use firefighting tools and report fire incidents quickly and effectively.
Ensure all fire extinguishers are marked, accessible, and maintained according to standards.
Clean equipment regularly and remove dry grass, brush, or trash from engine compartments and storage areas.
Inspect for fuel or oil leaks during daily checks and repair worn hoses or fittings immediately.
Refuel only when equipment is turned off and cooled, and never place them near potential ignition sources.
Prohibit smoking in and around buildings, fueling areas, and flammable material storage.
Store flammable liquids in certified containers and keep trash bins away from work structures.
Use a hot work permit system to control welding, cutting, or grinding activities, and have proper supervision in place.
Regularly inspect fire extinguishers and ensure they remain pressurized and easy to access.
Place fire extinguishers near hot workstations and ensure fire hydrants are not blocked.
Confirm all fire suppression systems comply with regulations and are in proper working order.
Keep storage yards free of flammable debris like cardboard, wooden pallets, or overgrown grass.
Follow your country’s regulatory requirements for fuel storage and dispensing procedures.
Avoid placing scrap materials in or near containers to reduce the risk of internal fires.
Coordinate with local fire departments and provide clear site maps showing access points and street names.
Offer a 24-hour emergency contact and clarify who has after-hours site access.
Request site walk-throughs and water supply assessments to ensure emergency readiness.
Mitti (by SafetyCulture) is a mobile-first operations platform adopted across industries such as manufacturing, mining, construction, retail, and hospitality. It’s designed to equip leaders and working teams with the knowledge and tools to do their best work—to the safest and highest standard. Efficiently manage and streamline health and safety processes across the organization, including incident management, safety audits and inspections, risk assessment, waste management, and more, using a comprehensive manufacturing software solution.
✓ Save time and reduce costs ✓ Stay on top of risks and incidents ✓ Boost productivity and efficiency ✓ Enhance communication and collaboration ✓ Discover improvement opportunities ✓ Make data-driven business decisions
