WHS codes of practice: a guide for Australian workplaces
Codes of practice show how to meet your safety duties. Here's what they are, where they're binding and what happens if you ignore one.

Codes of practice show how to meet your safety duties. Here's what they are, where they're binding and what happens if you ignore one.

Work health and safety (WHS) codes of practice are practical guides that show how to meet the duties in Australia's WHS laws. Each one covers a specific hazard or type of work, such as first aid, noise or construction.
The Act sets the duty, the regulations set specific rules and the code explains what good practice looks like on the ground. Whether you have to follow a code depends on where you work. The rest of this guide covers what that means for you.
Safe Work Australia writes the model WHS laws, and each state and territory adopts them into its own law. Victoria is the exception. The model has three layers:
The Act sets the main duty. A person conducting a business or undertaking (PCBU) must keep workers and others safe so far as is reasonably practicable.
The regulations set specific rules for certain risks, like licences for asbestos removal.
The codes explain how to meet those duties. In the model codes, “should” marks a recommended step.
A code also doesn't cover every hazard. Your duty to manage risk applies whether or not a code exists for it.
Not on their own. Safe Work Australia says approved codes of practice aren't law, but they're admissible in court. A court can treat a code as evidence of what's known about a hazard and what's reasonably practicable. Inspectors can also cite a code when they issue an improvement or prohibition notice.
In most cases, following an approved code is enough to meet your duty. You can do something different, as long as your approach is at least as safe as the code's.
That's the model position. Several states have gone further and made following a code a legal duty in its own right. The next sections show where.
Safe Work Australia publishes the model codes of practice, and each state and territory approves its own list, usually adapted from them. These examples of codes of practice show the range:
How to manage work health and safety risks, the general code on running a risk management process
Construction work, demolition work and excavation work
Confined spaces
First aid in the workplace
How to manage and control asbestos in the workplace, and how to safely remove asbestos
Hazardous manual tasks
Managing noise and preventing hearing loss at work
Healthcare and social assistance industry
Some codes target an industry, like construction or healthcare. Others target a hazard. For most businesses the hazard-based codes matter more, so start from your risk assessment and see which codes match.
The model is a template. What counts as binding depends on your regulator, so check the list for your jurisdiction.
Jurisdiction | The rule in brief | Where to check |
|---|---|---|
NSW (New South Wales) | Follow an approved code or show an equal or higher standard (section 26A, from 1 July 2026) | |
Queensland | Same duty since 1 July 2018, in section 26A of its WHS Act | |
WA (Western Australia) | ||
South Australia | Codes are admissible in court | |
Tasmania, NT, ACT and Commonwealth | Adopt the model laws, so check whether a section 26A-style duty applies | Your regulator's codes page |
Victoria | Not a model WHS state. It has its own compliance codes under the OHS Act 2004 |
NSW is the newest change. WHS codes of practice in NSW became a comply-or-do-better duty on 1 July 2026, and this section 26A explainer covers why.
Queensland has had the same duty for longer, and several of its WHS codes of practice were varied from 1 September 2026. Its Minister must review each approved code at least every five years.
In WA, WHS codes of practice sit alongside older transitional codes from its previous safety and mines laws, so check which list applies to your work.
Where there's no section 26A-style duty, skipping a code isn't a breach on its own. It weakens your position if something goes wrong, though. A court can use the code to judge what you should have done, and in Queensland an inspector can issue an improvement notice when an equal or higher standard hasn't been shown.
In NSW, Queensland and WA, ignoring a code without a safe alternative breaches a duty in its own right. Under the model WHS Act, the maximum penalty for a body corporate that fails a safety duty is AU$827,000, and each state sets its own amounts.
Mitti (by SafetyCulture) is the operations system for every site, shift and standard. Trusted by over 80,000 organizations, Mitti brings your people, operational data and workflows into one operating picture.
Your frontline teams get real-time visibility across every site, worker and task. They catch risks earlier, close out corrective actions and build a digital audit trail as the work happens, so you stay audit-ready without the paperwork.
✓ Catch hazards and near-misses the moment they happen
✓ Turn every issue into a clear next step with an owner and a deadline
✓ Stay audit-ready with a digital audit trail that builds itself
✓ Get workers trained and site-ready before they start
✓ Spot trends across sites, shifts and teams
✓ Improve safety every day with evidence from the people doing the work
Article by
Mitti (by SafetyCulture) Content Team
Mitti (by SafetyCulture) Content Contributor
View author profile